Light Source Mega-Coupler Pipe Adapter
Light Source Mega-Coupler Pipe Adapter for 1.5" Pipe, Aluminum Finish
The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut (not included). There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.
The Mega-Coupler Pipe Adapter can also be used on a Mega-Claw.
- Safe Vertical Working Load
1/4″ × .375 Socket Set Screw
1 Review Hide Reviews Show Reviews
the 1/2 inch hole is not threaded, but a clear hole, so a bolt has to be used. Seems to be a bit tight on the threads for the pipe. But it solves the problem of mounting something directly onto the end of the pipe without using a sidearm or cross-pipe.