| Physical |
| Length: 241 mm (9.5 in.) across yoke |
| Width: 241 mm (9.5 in.) across yoke |
| Height: 304 mm (12.0 in.) |
| Weight: 3.7 kg (8.2 lbs.) |
Dynamic Effects |
| Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, color wheel rotation effect, random color |
| Color mixing: RGB |
| Red: 0 - 100% |
| Green: 0 - 100% |
| Blue: 0 - 100% |
| Color temperature control: Variable 2500 - 10 000 K |
| Shutter effect: Electronic, with pulse and random effects |
| Electronic dimming: 0 - 100%, four dimming curve options |
| Pan: 540° |
| Tilt: 240° |
| Adjustable pan/tilt speed |
Optics |
| Light source: Cree XP-E high power emitters |
| Minimum LED lifetime: 50 000 hours (to >70% luminous output)* |
| *Manufacturer´s figure obtained under manufacturer´s test conditions |
Control and Programming |
| Control options: 3 control modes - RGB raw, RGB calibrated, Basic (RGB + CTC disabled) |
| Control resolution: 8-bit, with 16-bit control of pan & tilt |
| DMX channels: 8/12 |
| Setting and addressing: Control panel with backlit graphic display |
| Protocol: USITT DMX512/1990 |
| Transceiver: RS-485 |
| Fixture software update: Via DMX with Martin USB Duo DMX Interface |
Photometric Data |
| Total output: 2200 lm |
Construction |
| Color: Black or white |
| Housing: High-impact flame-retardant thermoplastic |
| Protection rating: IP20 |
Installation |
| Mounting points: One M12 threaded hole for rigging clamp |
| Orientation: Any |
| Minimum distance to combustible materials: 100 mm (3.9 in.) from head, no minimum distance from base |
| Minimum distance to illuminated surfaces: 200 mm (7.9 in.) |
Connections |
| AC power input: Neutrik PowerCon |
| AC power throughput: Neutrik PowerCon |
| DMX data in/out: 5-pin locking XLR |
Electrical |
| AC power: 100-240 V nominal, 50/60 Hz |
| Maximum total power consumption: 123 W |
| Power supply unit: Auto-ranging electronic switch mode |
| Main fuse: 5 AT (slow blow) |
| Standby power: <25 W |
Typical Power and Current |
| 100 V, 50 Hz: 122 W, 1.3 A, PF 0.991 |
| 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987 |
| 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938 |
| 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915 |
| 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900 |
| PF = power factor |
| Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
Thermal |
| Cooling: Forced air (temperature-regulated, low noise, user-definable levels) |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Minimum ambient temperature (Ta min.): 5° C (41° F) |
| Total heat dissipation (calculated, +/- 10%): 420 BTU/hr. |